Nortel Networks 3904 - Manual (Page 4)

LTPS 3904 Reference Guide
CALL PARK:
To “park” a call which can then be retrieved
from any phone in the district
1. Press Park Soft key, while on the phone
2. Note the Number that appears on your
display (i.e. 3005)
3. Press OK Soft key, then Goodbye
The caller is now on hold in the system to be
picked up by another individual
4. Inform the other individual through the
overhead (intercom) paging system that they
have a call parked at _ _ _ _
The individual may now go to any telephone in
the district
PICKING UP CALL PARK:
5. Dial the number that is paged over the
loudspeaker and say Hello
CHANGING FEATURE KEY LABEL:
1. Press Options Key
2. Use the Navigation Keys
to highlight Change feature key label
3. Press Select Soft key twice
4. Press the Feature Key you want to change
5. Using the Delete Soft key clear out the
current label
6. Enter your new label using the keypad
7. Press the Done Soft key when complete
8. When you have finished entering all the
names press the Quit key
OPTIONAL FEATURES
INTERCOM:
1. Lift handset,
2. Press Intercom Key
(located in the upper right corner)
3, Dial their 2-digit intercom number.
RING PICK UP:
1. Lift handset.
2. Press the Pickup Soft key
TO PROGRAM AUTODIAL:
1. Without lifting the handset,
Press the Autodial Key,
2. Enter number to be programmed,
including the “9” and area code,
3. Press Autodial Key again.
TO USE AUTODIAL:
1. Press your Primary Extension Key
2. Press Autodial Key of number you wish
to call
3. Call is automatically dialed for you.
For additional help contact a
Technology Department Technician
Ext. 5595
IMPORTANT NUMBERS
Name Number
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
NOTES
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________