Nortel Networks NN43001-122 - Manual (Page 43)

Configure Microsoft Exchange Unified Messaging in CS 1000 Element Manager 43
2 Navigate to the Edit page of the Nodes: Servers, Media Cards
configuration page.
3 Expand Microsoft Unified Messaging.
4 Delete the required Auto Attendant Number(s) by clicking the
Remove button and saving the configuration.
--End--
Configure information for the MWI Application DN
The following procedure details the steps to configure the MWI Application
DN information for a Node interacting with Microsoft Exchange Unified
Messaging.
Configure MWI Application DN information
Step Action
1 Log on to Element Manager with a valid User Account.
2 Navigate to the Edit page of the Nodes: Servers, Media Cards
configuration page.
3 Expand Microsoft Unified Messaging.
4 Configure the proxy DN for the MWI application and save the
configuration.
--End--
Select MWI Dial Plan type
The following procedure details the steps for selecting the desired MWI
Dial Plan type for a Node interacting with Microsoft Exchange Unified
Messaging.
Note: Currently, the available dial plan types are restricted to CDP
and UDP only.
Select the desired MWI Dial Plan type
Step Action
1 Log on to Element Manager with a valid User Account.
2 Navigate to the Edit page of the Nodes: Servers, Media Cards
configuration page.
3 Expand the Microsoft Unified Messaging.
Nortel Communication Server 1000
Communication Server 1000 with Microsoft Exchange Server 2007 Unified Messaging Fundamentals
NN43001-122 02.04
24 October 2008
Copyright © 2008 Nortel Networks
.