Operation – NAD C715 DAB User Manual

Page 12

REVIEW PROGRAM LIST
1 Initiate review of your programmed entries by pressing [PRoGRAM] at

SToP mode.

2 The VFD will show the first Program Number.
3 Press [PRoGRAM] repeatedly to step through the program sequence.

you will have reached the end of the program sequence when “P-End” is
displayed at the VFD.

EDIT PROGRAM LIST
1 Initiate editing of your programmed entries by pressing [PRoGRAM] at

SToP mode.

2 The VFD will show the first Program Number.
3 Press [PRoGRAM] repeatedly to step through the program sequence.

Stop at the program sequence you want to edit.

4 To change the programmed track/file of a particular sequence, use the

Direct-Entry numeric keypad buttons to overwrite the current track/file.

5 Press [PRoGRAM] again to continue with other program track changes

or press [SToP] to end the editing.

DELETE PROGRAM
1 To delete a particular programmed track/file, press repeatedly

[PRoGRAM] key in SToP mode until the desired programmed sequence
is reached. Press SR 7’s [ClEAR] key once and the track/file in the
particular sequence is deleted. The program sequence will adjust
accordingly as a programmed track/file is deleted.

2 To clear the program memory, perform any of the following steps

• Press [oPEN] to open the disc tray.

• Press [PRoGRAM] at stop mode and then press and hold SR 7’s

[ClEAR] key until the unit reverts to the default display, i.e. total track
number and playback time.

OPERATION

USING THE C 715 – CD MODE

LIS

LIA

РУ

СС