Nortel Networks COOLPIX S8000 - Manual (Page 48)

36
Adjusting Brightness, Vividness, and Hue in A (Auto) Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
3
Adjust brightness, vividness, or hue.
• The slider is highlighted when o or G is selected and
the k button is pressed in step 2, while z is
highlighted when F is selected and the k button is
pressed in step 2.
• Use the rotary multi selector to perform the following
operations.
-
J, K: Press J or K to move the slider to enable or
disable adjustment. The effects of adjustment can be
compared with no adjustment.
- H, I: Press H or I to move the slider when the
slider is highlighted. The effects of adjustment can be confirmed in the monitor as
applied. The slider can also be moved by rotating the rotary multi selector.
• When the slider is highlighted, press the k button to apply the adjustment and return
to step 2. Follow the procedure described in steps 2 and 3 to apply other adjustments.
• Highlight z and press the k button, or press I, to disable adjustment and return to step 2.
• Refer to the following sections for more information on adjusting each setting.
- “Brightness Adjustment (Exposure Compensation)” (
A 37)
- “Vividness Adjustment (Saturation Adjustment)” ( A 38)
- “Hue Adjustment (White Balance Adjustment)” ( A 38)
4
Use the rotary multi selector to select y and
press the
k button when adjustment is
complete.
When brightness adjustment is applied, the value is
displayed with the H indicator.
When vividness adjustment is applied, the a indicator is
displayed.
When hue adjustment is applied, the b indicator is
displayed.
5
Press the shutter-release button to take a picture.
To disable adjustments applied using the creative slider, follow the procedure described
in steps 1 through 4 to disable adjustments for each setting.
C
Adjustments Using the Creative Slider
The brightness (exposure compensation), vividness, and hue adjustments are value stored in the
camera’s memory even after the camera is turned off, and reapplied the next time A (auto) mode is
selected.
Brightness (Exp. +/–)
+1.0 +1.0
Slider
Off
Exit
88
+0.3 +0.3