Navman Sport Tool M300 - Manual (Page 20)

M300
1-20
NAVMAN M300 - Normal operation
5.1.6 Clock mode
Clock mode shows the current time and date.
(Time is only displayed while GPS satellite signals are available.
By default, GPS time is displayed. See section 4.1.5 for
instructions on setting local time.)
Access this mode
If necessary, press to turn the power on and start normal
operation. Press repeatedly until the screen appears as
shown above.
While in Clock mode
• Press to store current lap data (the screen briefly shows the
lap distance, lap number, and lap time that is being stored).
• Press and hold to clear all* session data. (*Does not clear
odometer).
• Press to go to the next mode.
Note: If GPS signals are not yet obtained a ‘no GPS’ alert is
displayed. The antenna icon flashes until GPS signals are received.
current time current date
PM