Nokia 5250 - Manual (Page 52)

Before using voice tags, note the following:
•
Voice tags are not language-dependent. They are dependent on the speaker's
voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Default numbers and addresses
You can assign default numbers or addresses to a contact. If a contact has several
numbers or addresses, you can easily call or send a message to a certain number or
address. The default number is also used in voice dialling.
1 In the contacts list, select a contact.
2 Select Options > Defaults .
3 Select a default to which you want to add a number or an address, and select
Assign .
4 Select a number or an address you want to set as a default.
5 To exit the Defaults view and save the changes, tap outside the view.
Ringing tones, images, and call text for contacts
You can define a ringing tone for a contact or group, and an image and a call text
for a contact. When the contact calls you, the device plays the selected ringing tone
and shows the call text or image (if the caller’s phone number is sent with the call
and your device recognises it).
52 Contacts