beautypg.com

Prolong battery life – Nokia 5250 User Manual

Page 11

background image

SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and

you need the PUK code to unblock it.

PIN2 code — This code (4 - 8 digits) is supplied with some SIM cards, and is required

to access some functions in your device.

Lock code (also known as security code) — The lock code helps you to protect your

device against unauthorised use. The preset code is 12345. You can create and

change the code, and set the device to request the code. Keep the new code secret

and in a safe place separate from your device. If you forget the code and your device

is locked, your device will require service. Additional charges may apply, and all the

personal data in your device may be deleted. For more information, contact a Nokia

Care point or your device dealer.

Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are

required to change a blocked PIN code or PIN2 code, respectively. If the codes are

not supplied with the SIM card, contact the network service provider whose SIM card

is in your device.

International Mobile Equipment Identity (IMEI) number — This number (15 or 17

digits) is used to identify valid devices on the GSM network. Devices that are, for

example, stolen, can be blocked from accessing the network. The IMEI number for

your device can be found under the battery.

Prolong battery life

Many features in your device increase the demand on battery power and reduce the

battery lifetime. To save battery power, note the following:

Features that use Bluetooth coonectivity, or allowing such features to run in

the background while using other features, increase the demand on battery

power. Deactivate Bluetooth connectivity when you do not need it.

If you have selected

Packet data connection

>

When available

in the

connection settings, and there is no packet data coverage (GPRS), the device

periodically tries to establish a packet data connection. To prolong the

operating time of your device, select

Packet data connection

>

When

needed

.

Find help 11