NEC XT9000 - Manual (Page 13)

E – 6
ENTER
CANCEL
UNDO
AUTO
HELP
ON
TEST
ABC 1 DEF 2 GHI 3
JKL 4 MNO 5 PQR 6
STU 7 VWX 8
0
YZ/ 9
POWER INPUT
OFF
INFO
PIXEL SOUND OSD
MAGNIFY/
CTL
FOCUS +
-
ZOOM +
MENU/ ADDRESS
IMAGE/ PROJECTOR
POSI/ LENS
KEY ST./
ON
OFF
R E-LIST/
PICTURE
ADJUST
WHITE BAL.
B AMP/ G
PICT/ SHUT
-
MUTE
2
13
28
8
7
6
22
21
15
17
16
3
10
11
26
27
9
23
14
12
19
18
20
5
4
25
24
1
Remote Control
1 POWER ON
Press to turn on the projector. The POWER indicator lights up green.
2 POWER OFF
Press and hold this button for a minimum of two seconds to turn off the
projector.
3 MENU
Press to display the main menu.
While pressing and holding CTL, press this button to display the Re-
mote Control ID dialog box to specify the remote control ID.
4 ENTER
Executes the menu selection and activates items selected from the menu.
When the slidebar or dialog box is displayed:
Pressing this button confirms adjustments/setting and returns to the
previous menu display.
5 SELECT (Up/Down/Left/Right)
When pressed together, the CTL and ᮤ buttons work as a Back Space
key in the entry screen.
Pressing and holding CTL, then this button moves the menu, slidebar
or dialog box.
6 ADJUST WHITE BAL
Press to display the Color adjustment screen. Pressing this button se-
quentially selects "Color Temperature"
→ "White Balance - Brightness"
→
"White Balance - Contrast"
→
"Signal Level"
→
"Ref.White Bal"
→
"Switcher-Gain".
7 ADJUST PICTURE
Press to display the Picture adjustment screen. Pressing this button
sequentially selects "Brightness"
→
"Contrast"
→
"Saturation"
→
"Color"
→
"Hue"
→
"Sharpness"
→
"V-Aperture"
→
"Gamma Correction".
8 IMAGE/PROJECTOR
Press to display the Image Option screen. Pressing this button sequen-
tially selects "Pixel Adjust"
→
"Position"
→
"Aspect Ratio"
→
"Resolu-
tion" → "Overscan" → "Video Filter" → "Blanking".
While pressing and holding CTL, pressing this button rotates "On/Off
Timer"
→
"Sleep Timer"
→
"Menu"
→
"Setup"
→
"Link Mode"
→
"Switcher Control".
9 INPUT
Use to select an input, to name a signal, or to enter a passcode during
input registration.
1--INPUT 1 for RGBHV/Y, Cb/Pb, Cr/Pr
2--INPUT 2 for RGBHV/Y, Cb/Pb, Cr/Pr
3--INPUT 3 for RGB
4--INPUT 4 for Y, Cb/Pb, Cr/Pr
5--INPUT 5 for VIDEO 1
6--INPUT 6 for VIDEO 2
7--INPUT 7 for S-VIDEO 1
8--INPUT 8 for S-VIDEO 2
9--INPUT 9 for RGB DIGITAL input
0--INPUT 0 for SDI input on the optional SDI board
10 UNDO
Press to return the adjustments and settings to the previous condition.
While pressing and holding CTL, pressing this button clears all the menus
or adjustment/setting screen. At this time the adjustments/settings are
stored in memory.
11 CANCEL
Press to exit the menu.
Press this button with CTL to return to the previous menu while the
menus appear. This feature allows you to adjust several items concur-
rently.
12 INFO
Displays the "Source Information" or "Projector Information" window.
This button toggles between these two windows.
13 TEST
Press to display the test pattern. Pressing this button sequentially se-
lects nine test patterns.
14 HELP
Provides online help.
15 PIXEL
Displays the Pixel Adjust screen to adjust the clock and phase.
16 AUTO (RGB only)
Press to adjust Position-H/V and Pixel Clock for an optimal picture.
NOTE: The Pixel Phase is not available.
17 POSITION
Press to display the Blanking screen; press again to display the Posi-
tion screen.
While pressing and holding CTL, pressing this button displays the Lens
Shift adjustment screen.
18 MUTE SOUND
(available only when using with the ISS -6020 or IPS4000)
Turns off the sound for a short period of time. Press again to restore the
sound.