NEC XT9000 - Manual (Page 49)

E – 42
7. Optional Accessories
Lens TL-08SF (Short Focal Lens 0.84) : 10kg
TL-1ZH (Zoom Lens 1.5 - 2.5:1) : 5.5kg
TL-2Z (Zoom Lens 2.5 - 4.0:1) : 4.5kg
TL-4Z (Zoom Lens 4.0 - 7.0:1) : 4.5kg
Interface Board XT SDI BOARD
Ceiling Mount Kit XL CMKIT
Switcher ISS-6020 Video/RGB Switcher
A Serial Digital Interface (SDI) board is optionally available.
XT SDI BOARD
This board accepts the input of non-compressed signal sources such as commercial type digital VTR(e.g., D1/D5-VCR) compatible with digital
serial component signals (of the SMPTE 259M-C standard) and provides a high quality image without quantization noise. Note that the BNC cable
used with the SDI connector should be Belden 8281 cable, or 3C-2V equivalent cable or better.
Packaged items: SDI board (1), shield case (1), connector cable (1), and installation manual (1)
REMOTE 3 (XLR) Pin Assignments and Signals
IN OUT
Pin No. Signal Pin No. Signal
1 Ground 1 Ground
2 +3.3V 2 No connection
3 DATA IN 3 DATA OUT
REMOTE3
IN OUT
NOTE: The wireless remote control can operate even if the plug of the remote cable is inserted into REMOTE 3 (XLR) connectors.
For the wireless remote control not to operate, insert the plug of the remote cable into the REMOTE2 IN jack.