National Instruments NI 9472 - Manual (Page 2)

NI 9472/9474 2 ni.com
This document describes how to use the National Instruments 9472
and National Instruments 9474 and includes specifications and
terminal or pin assignments. In this document, the NI 9472/9474
with screw terminal and NI 9472 with DSUB are referred to
inclusively as the NI 9472/9474. Visit
ni.com/info and enter
rdsoftwareversion to determine which software you need for
the modules you are using. For information about installing,
configuring, and programming the system, refer to the system
documentation. Visit
ni.com/info and enter cseriesdoc for
information about C Series documentation.
Note The safety guidelines and specifications in this
document are specific to the NI 9472/9474. The other
components in the system might not meet the same safety
ratings and specifications. Refer to the documentation for
each component in the system to determine the safety
ratings and specifications for the entire system. Visit
ni.com/info and enter cseriesdoc for information
about C Series documentation.
Safety Guidelines
Operate the NI 9472/9474 only as described in these operating
instructions.