NEC 42/50PD1 - Manual (Page 21)

21
Daisy-chaining Your monitors
The REMOTE IN/OUT terminals allow you to control
multiple monitors using one remote control.
Note: The connection of more than three PlasmaSync
42/50PD1 or more with THROUGH OUT (VIDEO)
terminals may degrade image quality.
To do so:
When using the VIDEO inputs:
THROUGH OUT (VIDEO) Connections
1. Connect THROUGH OUT BNC or S-VIDEO OUT to
external components to relay the signal input at
VIDEO IN(BNC-type), or S-VIDEO IN.
When using the RGB inputs:
THROUGH OUT Connections
1. (RGB2): Connect the R.G.B.H/CS and V THROUGH
OUT terminals to relay the signal input at the R.G.B.H/
CS and V IN terminals.
2. Connect the REMOTE IN of the monitor to the RE-
MOTE OUT of the next monitor using the optional re-
mote cable.
Note: ''Plug and Play'' is not available for the RGB
2 BNC terminals.
Note: A maximum of 3 units can used which a
cascade connection. (VIDEO, RGB2)