Nikon Coolpix S640 - Manual (Page 140)

128
Basic Camera Setup: The Setup Menu
Sh
oot
in
g, P
laybac
k an
d Se
tu
p Me
nus
i Sound Settings
Adjust the following sound settings.
k Auto Off
If no operations are performed for the selected length of time, the monitor will
turn off and the camera enters standby mode (
A 19) to reduce drain on the
batteries. The power-on lamp blinks in standby mode. If no operations are
performed for another three minutes, the camera will turn off automatically.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from
30 s, 1 min (default setting), 5 min, and 30 min.
C
Canceling Standby Mode
Standby mode is canceled when the following buttons are pressed.
• Power switch
• Shutter-release button
C
Notes on Auto Off
Regardless of the option selected, the monitor will remain on as follows.
• While a menu is displayed: If auto off is set to 30 s or 1 min, it is extended to 3 minutes.
• Slide show playback: maximum of 30 minutes
• AC Adapter EH-62F is connected: 30 minutes
Press the d button M z (Setup menu) (A 117) M i Sound settings
Button sound
Turn button sound
On (default setting) or Off. A beep will sound once when
operations are completed successfully, twice when the camera acquires focus on
the subject, and three times when error is detected. Start-up sound will also play
when the camera is turned on.
Shutter sound
Choose shutter sound from
On (default setting) or Off.
Press the d button M z (Setup menu) (A 117)M k Auto off