Power requirements, Physical characteristics – National Instruments NI 9229E User Manual
Page 19
© National Instruments Corp.
19
NI 9229E/9239E
Power Requirements
Power consumption from chassis
Active mode ............................... 740 mW max
Sleep mode ................................. 25
μW max
Thermal dissipation (at 70 °C)
Active mode ............................... 760 mW max
Sleep mode ................................. 16 mW max
Physical Characteristics
Use a dry, low-velocity stream of air to clean the module. If
needed, use a soft-bristle brush for cleaning around components.
Note
For two-dimensional drawings and
three-dimensional models of the C Series module and
connectors, visit
ni.com/dimensions
and search by
module number.
Screw-terminal wiring ...................... 16 to 28 AWG copper
conductor wire with 7 mm
(0.28 in.) of insulation
stripped from the end