Netcomm liberty series - wireless n150 router – NetComm N150 User Manual
Page 49
YmL1�WN
NetComm Liberty Series 3G Wireless N150 Router
1�WN
NetComm Liberty Series 3G Wireless N150 Router
NetComm Liberty Series 3G Wireless N150 Router
3G Wireless N150 Router
www.netcomm.com.au
49
NetComm Liberty Series - Wireless N150 Router
5.
To use WPA-PSK/WPA2-PSK, please configure the following:
•
Change Security to WPA-PSK or WPA-PSK
•
Change encryption type to tKIP for WPA-PSK or AeS for WPA-PSK
•
Enter the WPA/WPA2 key in the Passphrase field.
Notes: The key needs to be more than 8 characters and less than 63 characters and it can be any combination of letters and numbers.
•
Click Apply to save the settings
Notes: Wireless client network cards must be WPA-compliant to connect to a WPA enable network, if in doubt check the wireless client network card documentation, or use WEP
security.
Notes: After changing the security settings, you might need to remove the current wireless settings on the computer and reconfigure the wireless computer according to the new
settings.