NetComm N150 - Manual (Page 10)

NetComm Liberty Series 3G Wireless N150 Wireless Router YmL1�WN YmL1�WN 1�WN
10 www.netcomm.com.au
Product Layout
Connecting and Configuring your Router
The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization. The
display is easily visible on the FRONT of the Router to provide you with information about network activity and status. See below for
explanation of each of the features.
Front
Panel Icon Description
Power Lights up when powered oN.
3G Lights up when the router is connected via 3G
WAN Lights up when the router is connected via WAN
Internet
WWW
Lights up when the router is connected to the internet via 3G or fixed line WAN
Wireless Lights up when WLAN is enabled. Blinks on traffic
LAN 1 Lights up when specific LAN connection is established. Blinks on LAN PORT
traffic
LAN 2 Lights up when specific LAN connection is established. Blinks on LAN PORT
traffic
Rear Ports
Reset/WPS
Button Press once to initiate WPS (See WPS section of this document). Hold this
button down for 10 seconds to reset to factory defaults.
3G USB
Modem USB port for connecting a compatible 3G USB modem
WAN WAN Ethernet port for Fixed Line (ADSL/Cable/Satellite) connection
LAN (1-2) LAN Ports for wired Ethernet clients (Computers, Laptops, etc)
Power Power connector, connects to DC 1V 1.5A Power Adapter