Nortel Networks BCM50 2.0 - Manual (Page 23)

Chapter 3 Installing the IP Softphone 2050 23
IP Softphone 2050 Installation Guide
USB Headset Adapter
Use this screen to configure your USB Headset Adapter.
Handsfree/
Paging/Ringing
Microphone This is the microphone which is used when the handsfree device is selected in the interface. This
selection normally should match the Nortel USB Audio Kit which enumerates as a USB Audio
Device
Handsfree/
Paging/Ringing
Speaker This is the speaker which is used when the handset free device is selected in the interface. It is
also the speaker which is used to play ring tone and the device pages are directed. This selection
normally should match the PC's speakers. This allows ring tone and pages to be heard over the
PC speakers rather than on the headset
Note: You must select the Headset Type to ensure optimal headset performance.
Table 2 USB Headset Adapter
Attribute Description
Version Shows the version of the USB Headset Adapter.
Note: If the USB Headset Adapter is not recognized or has a version number lower than 2.0, the
other features in this table are grayed out and unavailable.
Table 1 Select Sound Devices (Continued)
Attribute Description