Nortel Networks BCM50 2.0 - Manual (Page 21)

Chapter 3 Installing the IP Softphone 2050 21
IP Softphone 2050 Installation Guide
Server
If your site uses DHCP:
1 Select the Automatic (DHCP) option.
Using DHCP is the default method of locating the call server.
If DHCP is used, no further configuration is required.
If you are not using DHCP:
1 Clear the Automatic (DHCP) option.
2 Select the Server type you wish to configure: Primary, Secondary or Application.
3 Enter the IP address of the server.
Or
Enter the Name of the server.
If you do not know the server name or IP address and port number, ask your call server
administrator.
Note: To use DHCP, you need a DHCP server with call server IP address values
programmed as per the IP 2004.
Note: Using DHCP may not be appropriate for mobile users. These users commonly
want to connect to their office communications server rather than the local office
server.