Navman SmartS iCN530 - Manual (Page 58)

58
iCN 530 | User Manual
15. Installing Maps Using
Smart Desktop
Installing and Activating Maps on your iCN
1. Open Smart Desktop, if it is not already open:
Start  Programs  Navman  Smart for iCN530
2. Insert a Smart Map CD into your computer CD drive, the available maps
will display (the default colour for available maps is cross-hatch blue).
Note: If your computer opens Windows Explorer, close the Windows Explorer window.
3. Click the map you want to install to your iCN.
Note: You may need to install multiple maps to cover the desired geographical area.
4. You will be prompted to enter or update your contact details so Navman can advise you
when updates are released.
• If you are activating a map from a continental region that was not previously installed on
your iCN, follow the prompts to activate the new region. The four continental regions are
Europe, North America, Australia and New Zealand.
• When activation has completed, the map will change colour (the default colour for
activated maps is light green).
Maps available on the Map CD in your CD
drive are displayed in cross-hatch blue.
NOTE: Your iCN comes with preinstalled maps. If you have purchased a software or map upgrade,
follow the instructions in your Upgrade Guide to install and activate your new software or maps.
The activated map is displayed in light green.