Sip trusted nodes properties, Sip route properties – Nortel Networks NN44470-100 User Manual
Page 50
- 50 -
Nortel MAS Console
Nortel Media Application Server 6.0 for AS 5300
Fundamentals
NN44470-100 01.01 Standard
Release 6.0 03 June 2008
Copyright © 2008, Nortel Networks
SIP Trusted Nodes properties
The following figure shows an example of a SIP Trusted Nodes Properties
dialog box.
SIP Trusted Nodes Properties dialog box
The following table describes the SIP Trusted Nodes Properties dialog box
fields and buttons.
SIP route properties
The following figure shows an example of a Modify SIP Route dialog box.
Field
Description
Host or IP
Type the host name or IP address for the trusted
node.
Attention: If you use a host name, you must use
a Domain Name System (DNS) server to resolve it.
Restart Required
This is a read-only field. It indicates whether a
restart of the server is required if you modify the
trusted node host name or IP address. Values are
Yes and No. Yes indicates a platform restart is
required for the configuration change to take effect.
OK
Click OK to close the dialog box.
Cancel
Click Cancel to close the dialog box without saving
changes.
Apply
Click Apply to save property changes.