Nortel Networks NN44470-100 - Manual (Page 46)

- 46 -
Nortel MAS Console
Nortel Media Application Server 6.0 for AS 5300
Fundamentals
NN44470-100 01.01 Standard
Release 6.0 03 June 2008
Copyright © 2008, Nortel Networks
Configuration Properties dialog box
The following table describes the Configuration Properties dialog box fields
and buttons.
Translation properties
The following figure shows an example of a Translation Properties dialog box.
Field Description
Key This is a read-only field. It is the configuration
parameter name.
Description This is a read-only field. It provides a description of
the selected configuration item.
Restart required This is a read-only field. It indicates whether a
restart is required if you modify the properties for
this configuration item. Values are Yes and No.
Yes indicates a platform restart is required for the
configuration change to take effect.
Value The Value field represents the current value of the
configuration parameter.
Restore Default Click Restore Default to restore the configuration to
the factory default value.
OK Click OK to close the dialog box.
Cancel Click Cancel to close the dialog box without saving
changes.
Apply Click Apply to save property changes.