Nikon S51c - Manual (Page 144)

130
Configuring Wireless LAN Settings from the Camera
Wi
re
le
ss Se
rvi
ces
6
Choose the desired method for
specifying the camera’s IP address and
press d.
When [Configuration] is set to [Auto], camera’s IP
address will be specified automatically.
When [Configuration] is set to [Manual], configure
the [IP address], [Subnet mask], [Gateway], [Primary
DNS], and [Secondary DNS] settings in order, pressing
the shutter-release button to apply each setting.
When configuring [IP address], [Subnet mask],
[Gateway], [Primary DNS], and [Secondary DNS]
settings, enter each set of numbers so that they are
aligned to the right. Numbers must be entered
correctly to properly configure the settings.
When all settings have been configured, “Done” will
be displayed.
Configuration
Auto
Manual
Confirm
Back
IP address
1 9 2 . . . 1 6 8 0 0 0 0 1 5
Done
K