Navman VHF 7200 - Manual (Page 34)

34 VHF 7200 US and 7200 EU Operation Manual NAVMAN
5.2.4 Recall the Most Recent Incoming Call (LAST)
This facility is useful and used frequently.
1. Press CALL/MENU to enter DSC mode. LAST CALL is automatically selected. Press ENT to
display the contact details of the most recent incoming call.
2. Select the working channel and press ENT. (Note: Duplex channels cannot usually be called
and are automatically eliminated from the suggested call list. If the call is to a Coast Station,
the radio will recognize this and select the correct channel.)
3. The radio summarizes the call details and asks for confi rmation to send the call (SEND?).
Press ENT to send the call, and continue as explained in Section 5.2.1.
5.2.5 Call a Group (GROUP)
1. Press CALL MENU to enter DSC mode, then select GROUP. The radio displays the names
of your groups.
2. Select the group that you want to call (the Group MMSID must be set before making the call).
Then set the channel and continue as explained in Section 5.2.1.
5.2.6 Call All Ships (ALL SHIPS)
The ALL SHIPS ROUTINE call option is shown only on the 7200 US.
1. Press CALL MENU to enter DSC mode, then select ALL SHIPS.
2. The priority is set automatically to URGENCY. However, you can select one of the following
call priorities:
URGENCY for use when a serious situation or problem arises that could lead to a
distress situation
SAFETY to send safety information to all other vessels in range;
ROUTINE routine call (7200 US only).
VHF7200 USA
INDIVIDUAL
ROUTINE
>SEND?
VHF7200 USA
INDIVIDUAL
ROUTINE
10:22AM LOC
DSC CALL
INDIVIDUAL
>LAST CALL
GROUP
VHF7200 USA
INDIVIDUAL
ROUTINE
>SET CHANNEL
RD GROUP
055554444
ROUTINE
>SET CHANNEL
SELECT GROUP
>RD GROUP
GROUP #2
GROUP#3
DSC CALL
INDIVIDUAL
LAST CALL
>GROUP
VHF7200 USA
INDIVIDUAL
ROUTINE
>SEND?
ALL SHIPS
URGENCY
>YES
NO
ALL SHIPS
>URGENCY
SAFETY
ROUTINE
DSC CALL
LAST CALL
GROUP
>ALL SHIPS