NEC INTELLIGENT L2 SWITCH N8406-022A - Manual (Page 84)

Remote monitoring 84
Configuring RMON Events (BBI example)
1. Configure an RMON Event group.
a. Click the Configure context button.
b. Open the Switch folder, and select RMON > Event > Add Event Group.
Configure RMON Event Group parameters. This configuration creates an RMON event that sends a SYSLOG
message each time it is triggered by an alarm.
2. Click Submit.
3. Apply, verify, and save the configuration.
Open
Select
1. Apply
3. Save
2. Verify