Applying and saving configuration, Ssh and scp encryption of management messages – NEC INTELLIGENT L2 SWITCH N8406-022A User Manual
Page 25
Accessing the switch 25
For example:
>> # scp ad4.cfg [email protected]:putcfg
Applying and saving configuration
Enter the apply and save commands after the command above (scp ad4.cfg 205.178.15.157:putcfg), or use the
following commands. You will be prompted for a password.
>> # scp
>> # scp
For example:
>> # scp ad4.cfg [email protected]:putcfg_apply
>> # scp ad4.cfg [email protected]:putcfg_apply_save
Note the following:
• The
diff command is automatically executed at the end of putcfg to notify the remote client of the difference
between the new and the current configurations.
•
putcfg_apply runs the apply command after the putcfg is done.
•
putcfg_apply_save saves the new configuration to the flash after putcfg_apply is done.
•
The putcfg_apply and putcfg_apply_save commands are provided because extra apply and save commands
are usually required after a putcfg.
SSH and SCP encryption of management messages
The following encryption and authentication methods are supported for SSH and SCP:
•
Server Host Authentication — Client RSA authenticates the switch at the beginning of every connection
•
Key Exchange — RSA
•
Encryption — AES256-CBC, AES192-CBC, 3DES-CBC, 3DES, ARCFOUR
•
User Authentication — Local password authentication, RADIUS, TACACS+