NCR S16 - Manual (Page 17)

Confirming the CMOS Settings
NCR S16 Minitower Server Installing Network Operating System 2-5
On Board Communication Ports
Serial Port 1 Base Address 3F8h
Serial Port 2 Base Address 2F8h
Parallel Port Base Address Parallel 1 (3BCh)
Operation Mode Stndrd PP (SPP) Mode
ECP DMA Channel -
On Board PS/2 Mouse (IRQ 12) Enabled
Setup Password None
Power On Password None
10. Press Esc to return to the main menu in the BIOS Setup.
11. Select Power Saving Configuration, and set the parameter as follows:
Power Management Mode Disabled