Netac Tech T610 - Manual (Page 22)

Netac AirTrack T610 Wireless Broadband Router
17
Password user name and password.
Status The relevant information for WAN connection.
3.4 LAN
Figure 3.4 LAN Page
Table 3.4 LAN Configurations
Field Description
IP Address
Set the IP address of T610. Default: 192.168.1.1.
Note: To configure T610, the user must access T610 from a PC that is on the
same subnet.
Subnet Mask Allow the user to specify a subnet mask. Default: 255.255.255.0.
Enable DHCP Service Disable/Enable DHCP server.
Start IP Address Set the starting IP address of DHCP server's IP address. Default: 192.168.1.100.
End IP Address Set the ending IP address of DHCP server's IP address. Default: 192.168.1.150.
DHCP lease Set the effective time of the IP address assigned by DHCP server.