Netac Tech T610 - Manual (Page 10)

Netac AirTrack T610 Wireless Broadband Router
5
Figure 2.2 "Network and Dial-up Connections" dialog box
2. Double click "Local Area Connection" icon; the "Local Area Connection Status" dialog box will pop-up, as
Figure 2.3.
Figure 2.3 "Local Area Connection Status" dialog box
3. Click "Properties" button, bring up the "Local Area Connection Properties" dialog box, as Figure 2.4.
Figure 2.4 "Local Area Connection Properties" dialog box
4. Look over whether the “Internet Protocol (TCP/IP)” has been installed or not in the Figure 2.4. If it has
been installed, you can go up to the step 6; if it hasn’ t been installed, you should click “Install” in figure
2.4, the pop-up window shows as Figure 2.5.