Netac Tech T610 - Manual (Page 12)

Netac AirTrack T610 Wireless Broadband Router
7
Figure 2.7 "Internet Protocol (TCP/IP) Properties" dialog box
7. Select "Obtain an IP address automatically" or "Use the following IP address", and then click "OK".
Figure 2.8 Internet Protocol (TCP/IP) Properties setup
Note:
a. With built-in DHCP server, T610 can assign IP address to LAN host computer automatically, it is
suggested that users select “Obtain an IP address automatically”. Select "Use the following IP
address", user should configure the parameter by hand, T610's default IP address is 192.168.1.1,
the range of IP address can assigned to other computer are 192.168.1.2 192.168.1.254, subnet