Nortel Networks 1110 - Manual (Page 57)

While on an active call
57
If the transferred call is not answered, your telephone rings:
Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line. When
configured network-wide, Call Park can be used across networks. A
System Park extension can be configured to automatically park most
calls.
To park a call on the System Park DN or your own DN:
1. Lift the handset to reconnect to the
original caller.
2. Choose one of the following:
— Press the Transfer context-sensitive
soft key and repeat the transfer.
— If the transfer is picked up while you
are on the line, press the Goodbye
key to complete the transfer.
During an active call, press the Park
context-sensitive soft key twice.
Note: By default, the call is parked on
your DN unless a
System Park DN is
enabled to automatically park calls on
the system.
or
Trans
(Goodbye)
Park Park