Nokia 5233 - Manual (Page 27)

Transfer content for the first time
1. To retrieve data from the other device for the first time, on your device, select
Menu > Applications > Switch.
2. Select the connection type you want to use to transfer the data. Both devices
must support the selected connection type.
3. If you select Bluetooth connectivity as the connection type, connect the two
devices. To have your device search for devices with Bluetooth connectivity,
select Continue. Select the device from which you want to transfer content. You
are asked to enter a code on your device. Enter a code (1-16 digits), and select
OK. Enter the same code on the other device, and select OK. The devices are now
paired.
Some earlier Nokia devices may not have the Switch application. In this case,
the Switch application is sent to the other device as a message. To install the
Switch application on the other device, open the message, and follow the
instructions on the display.
4. On your device, select the content you want to transfer from the other device.
When the transfer has started, you can cancel it and continue later.
Content is transferred from the memory of the other device to the corresponding
location in your device. The transfer time depends on the amount of data to be
transferred.
Display indicators
The device is being used in a GSM network (network service).
You have one or more unread messages in the Inbox folder in Messaging.
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox folder.
You have missed calls.
Your device
© 2010 Nokia. All rights reserved. 27