Eizo FlexScan Color LCD Monitor SX2262W - Manual (Page 25)

Chapter 3 Setting Monitor
Chapter Setting Monitor
-1. Enabling/Disabling Mode Selection [Mode Preset]
Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode
unchanged.
Procedure
Choose from the Adjustment menu, and press .
Choose from the menu, and press
.
Select the mode to change its settings with or , and press .
Select “On” or “Off” with or .
Press to exit the adjustment.
Attention
You cannot set all the modes disable. Set at least one mode to “On”. •
-. Locking Buttons [Key Lock]
This function allows you to lock to prevent changing the adjusted/set status.
Procedure
Press to turn off the monitor.
Press holding down for at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
Choose from the menu, and press
.
Select “Off”, “Menu”, or “All” with
or , and press .
Settings Buttons that can be locked
Off
(Initial settings) None (All buttons are enabled)
Menu button
All All buttons excluding
Select “Finish” with or .
Press to exit.
The Optional Settings menu is closed.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.