Nikon Image Converter - Manual (Page 25)

25
6 Attach the camera support:
Slide the camera support bracket under the
camera and attach the knob (f) to the bottom
of the camera:
Lock the lever (e) at the back of the camera
support and lock the screws at the bottom of
the camera support
a. The big knurled knob (f) through the
camera platform has to line up with the ¼”
threaded hole on the camera bottom.
b. Start engaging the thread of the knob in the
thread of the camera but do not tighten it
yet.
c. Release the lever (e) at the back of the
platform to allow the spring-loaded pad
(d) to come in contact with the base of the
camera.
d. Finish tightening the knob (f) at the bottom
of the platform.
S
O
N
Y