Nikon Image Converter - Manual (Page 15)

15
4 Prepare the Mini35:
a. Release the two screws (k) on the bottom of
the camera support, and slide the support
toward the rear battery holder.
b. Release the lever (f), push the pad (e) down
and lock it in that position by tightening
lever (f).
The first time a camera has to be installed you
will find it easier to start by sliding the camera
support out of the way.
The camera support platform has a spring-
loaded pad in the center that adjusts for the
height of the camera. The knob with a lever (f),
at the back of the camera platform, locks the
spring-loaded pad in place. By releasing that
knob, the spring will push the pad to its
highest position making the mounting of the
camera difficult.
C
a
n
o
n