NEC FP1375X - Manual (Page 8)

English-7
English
Controls
OSM (On-Screen Manager) control buttons on the front of the monitor
function as follows:
When OSM controls are activated, icons are displayed at the top of the
menu. If an arrow (
→) is displayed in a sub-menu, it indicates further
choices are available. To enter a sub-menu, press PROCEED.
Brightness/Contrast Controls
Brightness: Adjusts the overall image and background screen
brightness.
Contrast: Adjusts the image brightness in relation to the background.
Sub-Menu
Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls.
Moves the bar in the - or +
direction to decrease or
increase the adjustment.
Only executes control or
enters sub-menu.
Resets all the controls within
the highlighted menu to the
factory setting.
EXIT
CONTROL
▲/▼
CONTROL -/+
PROCEED
RESET
Main Menu
Exits the OSM menu.
Moves the highlighted
area up/down to select
one of the controls.
Moves highlighted area
left/right to select one of
the controls.
Has no function.
With OSM menu screen,
reset.
D-SUB/DVI-I Without OSM menu screen, push to select the signal input
connector, D-SUB (VGA) or DVI-I.
NOTE: When the DVI input has been changed,
you must restart your computer.
NOTE: When RESET is pressed in the main and
sub-menu, a warning window will appear
allowing you to cancel the reset function.