NEC FP1375X - Manual (Page 15)

English-14
Unlimited number of Colours
30 kHz to 130 kHz
50 Hz to 160 Hz
640 x 480 @50 to 160 Hz
800 x 600 @50 to 160 Hz
1024 x 768 @50 to 144 Hz
1280 x 1024 @50 to 110 Hz
1600 x 1200 @50 to 95 Hz ....
1800 x 1350 @50 to 85 Hz
1800 x 1440 @50 to 80 Hz
1856 x 1392 @50 to 82 Hz
1920 x 1440 @50 to 80 Hz
2048 x 1536 @50 to 75 Hz
396 mm/15.6 inches
297 mm/11.7 inches
AC 100-120 / 220-240 V @ 50/60 Hz
495 mm (W) x 494 mm (H) x 473 mm (D)
19.5 inches (W)x 19.4 inches (H)x 18.6 inches (D)
29.7 kg
65.5 lbs
1.40 A @ 100-120 V, 0.70 A @ 220-240 V
1.60 A @ 100-120 V, 0.75 A @ 220-240 V
Monitor Specifications
Picture Tube Diagonal:
Viewable Image Size:
Display Colours Analog input:
Synchronization Range Horizontal:
Vertical:
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area Horizontal:
(Factory setting) Vertical:
Power Supply
Dimensions
Weight
Input Signal Video:
Sync:
Current Rating Monitor:
Monitor + USB Hub:
MultiSync FP1375X
55 cm/22 inch
508 mm/20 inch
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative; TTL Level)
Sync on Green video (Positive) 0.7 Vp-p and sync Negative
0.3 Vp-p
Notes
90° deflection, 0.24 mm grill
pitch, medium short
persistence phosphor,
aperture grille CRT,
multi-layered, anti-static
screen coating, semi-dark-tint
screen and OptiClear
screen
surface.
Depends on display card
used.
Automatically
Automatically
Some systems may not
support all modes listed.
NEC-Mitsubishi Electronics
Display cites recommended
resolution at 85 Hz for optimal
display performance.
Dependent upon signal timing
used, and does not include
border area.
Specifications
➙➙➙
TMDS, 165 MHz max. signal link DVI Digital Input
406 mm/16.0 inches
305 mm/12.0 inches Active Display Area
(Full scan) Dependent upon signal timing
used, and does not include
border area.
1 upstream, 3 downstreams, USB Vers. 1.1 self powered hub,
500 mA per 1 downstream port USB connection