Nikon SBV5121 User Manual
Page 22
SBV5121 VoIP Cable Modem User Guide
14
9
After the window shown under step 8 is displayed, click Next.
If a window with the message Copying Files... displays and asks for your CD-ROM drive, type your CD-ROM
drive letter (for example, “D:”) and click OK.
If an Insert Disk window similar to the following is displayed, Windows system files are needed to complete
the installation. To install the files, insert your Windows 98 Second Edition CD-ROM in the CD-ROM drive and
click OK.
After all the necessary files are loaded, the following window
is displayed confirming a successful installation.
10
Click Finish. The Systems Settings Change window is displayed:
11
Click Yes to restart your computer.
When you finish setting up the USB driver, you can continue with
“Configuring TCP/IP in Windows 98 Second
If you have difficulties setting up the USB driver, perform
“Removing the USB Driver from Windows 98 Second
on page 37 and repeat this procedure. If that does not correct your problem, see the
Regulatory, Safety, Software License, and Warranty Information card provided with your SBV5121 VoIP cable
modem for information about obtaining warranty service.