Nikon SBV5121 - Manual (Page 12)

Introduction Installation Troubleshooting Glossary License
SBV5121 VoIP Cable Modem User Guide 4
Rear Panel
The rear panel provides cabling connectors and the power receptacle:
Before You Begin
Before you begin the installation, check that you received the following items with your VoIP cable modem:
Key Item Description
1 & 2 Tel 1 and Tel 2 Provide connections for two telephone lines.
3 ETHERNET Provides a connection to Ethernet equipped computers using a cable terminated with an RJ-45
connector.
4 USB Provides a connection to USB equipped computers.
5 Reset If you experience a problem, you can push this recessed button to reset the VoIP cable modem
(see
“Troubleshooting” on page 35). Resetting may take some time (5 to 30 minutes) because
the VoIP cable modem must find and lock on the appropriate communications channels.
6 CABLE Provides a connection to the coaxial cable (coax) outlet.
7 +12VDC Provides power to the VoIP cable modem.
Item Description
Power
adapter or
cable Connects to:
• the AC power outlet
• to a UPS
10/100Base-T
Ethernet cable
Connects to the Ethernet port
USB cable Connects to the USB port
Phone wire Connects the telephone to the cable system to provide telephone service
SBV5121 VoIP Cable
Modem CD-ROM Contains the User Guide and USB drivers
CABLE
+12VDC
USB
TEL
2
TEL
1
ETHERNET
1 2 &
3
4
5
6
7