Setting up a usb driver, Caution – Nikon SBV5121 User Manual
Page 18
SBV5121 VoIP Cable Modem User Guide
10
8
To connect the telephone line, plug a phone wire into the Tel 1 connector. You can also connect a second
telephone line to the Tel 2 connector.
Setting Up a USB Driver
The following subsections describe setting up a USB driver. Before connecting a PC to the USB port, perform the
appropriate procedure for your Windows version:
•
“Setting Up a USB Driver in Windows 98 Second Edition”
•
“Setting Up a USB Driver in Windows 2000”
•
“Setting Up a USB Driver in Windows Me”
•
“Setting Up a USB Driver in Windows XP”
When you finish setting up the USB driver, you can continue with
The SBV5121 VoIP cable modem USB driver does not support Macintosh or UNIX computers. For those systems,
you can connect through Ethernet only.
Caution!
To reduce the risk of fire, use only No. 26 or larger UL Listed or CSA Certified Telecommunication
Line Cord to connect a telephone line to your SBV5121 VoIP cable modem.
Do not connect both the Ethernet and USB cables to the same computer. Connect to either Ethernet
or USB.
Contact your cable provider before connecting your VoIP cable modem to your existing telephone wiring.
Do not connect the telephone wire to a traditional telephone (
Be sure the phone connectors are neither connected together nor connected to wall jacks on the
same network.
Caution!
Be sure the SBV5121 VoIP Cable Modem CD-ROM is inserted in the CD-ROM drive before you plug
in the USB cable.
CABLE
+12VDC
USB
TEL
1
TEL
2
ETHERNET
Either/or