NEC MT1065 - Manual (Page 31)

E-27
Changing Background Logo
You can change the default background logo using the PC Card Files
feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP
are not available.
1. From the menu, select [Tools] → [PC Card Files] to display a list of all
the files stored in the PC card so that you can select a file you want to
use as a background logo.
2. The Logo button allows you to select a background logo from graphic
files on a PC card and change to it as the background logo.
3. Use the SELECT ̆ or ̄ button to select a JPEG or BMP file for your
background logo.
4. Use the SELECT ̈ and then ̄ button to select "Logo".
5. Press the ENTER on the remote control or the cabinet. You will get
the confirmation dialog box.
6. Select "OK" and press the ENTER button. This completes changing
a logo for the background.
* Once you have changed the background from the NEC logo to an-
other, you cannot return the logo to background even by using Fac-
tory Default. To do so, repeat the above steps. The NEC logo file is
included on the supplied CD-ROM NEC Projector User Supportware
(/Logo/nec_bb_x.jpg).
Making Freehand Drawings on a Projected
Image (ChalkBoard)
The ChalkBoard feature allows you to write and draw messages on a
projected image.
NOTE: The ChalkBoard feature is available only when a USB mouse is used.
From the menu, select [Tools] → [ChalkBoard] to display the ChalkBoard
tool bar that contains the following icons.
Drag
Pen Eraser Drive
Exit
Clear Color
Drag ............ Drags to move the tool bar by clicking on the blue part.
(for USB mouse operation only)
Pen .............. Left-click and drag to draw. Left-click [ ̆] or right-click the
pen icon to display the pen palette containing four lines of
different thickness from which you can select a line you
prefer by left-clicking.
Color ........... Selects a color. Left-click to display the color palette from
which you can select a color you prefer by left-clicking.
Capture ....... Left click to capture and save freehand drawings in the
PC card.
Eraser ......... Left-click and drag to erase part of a drawing. Left-click
[ ̆] or right-click the eraser icon to display the eraser pal-
ette containing four eraser of different thickness from which
you can select an eraser you prefer by left-clicking.
Clear ........... Left-click to clear the drawing completely from the
ChalkBoard screen.
Drive ............ Switches between PC Card slot 1 and 2.
Hide ............. Hides the tool bar by left-clicking. Right-clicking anywhere
on the screen displays the ChalkBoard tool bar again.
Exit .............. Clears the complete drawing and exits the ChalkBoard.
NOTE:
• The menu is not available while you display the ChalkBoard screen.
• Switching slides clears a drawing completely.
Capture Hide