Navigon 7110 - Manual (Page 45)

User's manual NAVIGON 7100 | 7110
Useful functions - 45 -
10.3 TMC (Traffic Information)
The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary, it can change your route
dynamically in order to avoid a traffic jam, for example.
10.3.1 Displaying traffic messages
The traffic reports that are currently valid are available via the options of
several windows.
1. Tap
on Options > Traffic.
The T
RAFFIC
I
NFORMATION
window opens.
Above the list, the Traffic information button shows the type of traffic
messaging listed and how many messages of this type are listed.
2. Tap the Traffic information button to select the messages to be
displayed.
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
►
Tap a message to display detailed information.
The navigation system can Avoid ( ) or Ignore ( ) obstructions
on the route. The Avoid / Ignore button shows the corresponding status.
►
Tap the button to select the alternative setting.
►
Tap the (Back) button to close the T
RAFFIC
I
NFORMATION
window.
10.3.2 TMC Settings
►
In the T RAFFIC I NFORMATION window, tap on Options > TMC
Settings.
In the TMC S
ETTINGS
window, you can set and configure the TMC-
sender, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode button to determine the settings for the station
you have chosen to receive traffic information.
►
Automatically: Use the arrow buttons in the station section to tune
into another station. The system will search for another station if
reception becomes poor.
►
Hold station: Use the arrow buttons in the station section to tune
into another station. The system will search for the same station on
a different frequency if the signal becomes poor.