NETGEAR EXPRESS EVA9100 - Manual (Page 83)

Default Configuration and Technical Specifications A-1
v1.0, October 2009
Appendix A
Default Configuration and Technical
Specifications
This appendix describes the factory default settings, supported media file formats, and technical
specifications for the Digital Entertainer Express.
Restoring Factory Settings
There are two ways to restore factory configuration:
• Press Home, and select More > Supervisor functions > Advanced Settings > Restore
factory defaults.
• Power off the unit from the rear power switch, then power on the unit. Wait for the LED to
blink orange, then press and hold the Restore Factory Settings button.
The LED will begin blinking blue signaling that factory defaults are being restored, and then
the unit will restart.
The following table lists the default settings of your Digital Entertainer Express.
Figure A-1
Table A-1. Default Configuration Settings
Feature Description
Language English
Video mode Standard definition NTSC
Restore Factory Settings