Keypad, Display - detailed description, Overview – Nokia 9110i User Manual
Page 9
9 (26)
3. INTRODUCTION TO THE USER INTERFACE OF THE NOKIA 9110i COMMUNICATOR
This section gives a short overview of the user interface of the Nokia 9110i Communicator. The Nokia
9110i is a Communicator device with features of both PDA and CMT sides. WAP services application is
implemented in PDA side together with the other Internet services, like Mail and WWW. The phone UI
in the CMT part does not contain any WML browser.
This section provides a basic understanding of how the product behaves when using different kinds of
Browser/WML elements.
Figure 1 shows the User Interface of the Nokia 9110.
Figure 1.
3.1 Keypad
Keypad type in 9110i Communicator is QWERTY keyboard with a menu key.
3.2 Display - detailed description
3.2.1 Overview
PDA screen resolution is 640x200 pixels. The screen is divided into three parts; the indicator area, the
application area and the command button area.
•
In the indicator area there are spaces reserved for different kinds of information, e.g. inbox and
outbox, clock, profile etc. The indicator area is 80 pixels wide
•
The width of the command button area is dynamic, it depends on the longest command text in the
view. The width changes only if the whole view changes, i.e. the width remains the same when
only the button texts change in the same view. The command texts are aligned right. The minimum
width of the command button area is 80 pixels, the maximum being 130 pixels.