NETGEAR Music Player - Manual (Page 16)

14
VIII. Choosing Your Music Library
Once SoundBridge is successfully connected to your network and your server’s music sharing
options are enabled, SoundBridge will automatically find your computer’s music server and
detect any supported music libraries. After SoundBridge detects your music library, you will
be prompted to choose the library you would like to access from a screen that looks something
like this:
PLAY DAN’S MUSIC LIBRARY
PLAY FAVORITE RADIO STATIONS
SYSTEM CONFIGURATION
Navigate to your preferred library (in this case, “Dan’s music library”) and press Select. You will
then see the “Main Menu,” where you can begin browsing and playing your music.
If instead you see the message [NO MUSIC LIBRARIES FOUND], your network is not connecting
to your computer properly or your music library is not found. Please choose SYSTEM
CONFIGURATION for troubleshooting your network connection. (Make sure your computer is
turned on, your server is running, and music sharing is enabled.)
After you have successfully connected to your music library, SoundBridge will automatically
connect to that library upon startup (provided you only have one music library to choose
from). If you would like to return to the screen that allows you to choose your desired libraries
manually, select the “CHANGE LIBRARY OR CONFIGURATION” option located at the bottom of
SoundBridge’s Main Menu (accessible by pressing the Menu button).
Visit www.rokulabs.com/support for help if you are still having trouble connecting to your
music library. Check to make sure your router is compatible with SoundBridge — a list of
compatible wireless access points is available at www.rokulabs.com/support.
IX. Playing Music
You are now ready to begin playing music. Using your remote control, find a song you want to
play, then press Play to play it immediately. See page 19, “Music Playback,” for more detailed
instructions about browsing and playing music.