Napco Security Technologies GEM-X255 - Manual (Page 18)

18
K E Y P A D F U N C T I O N S
Activate Telephone Test? (Telephone Test programmed?
!
YES
!
NO). Sends a
communicator test to the central station. A communication failure will be indicated
at the keypad by a system trouble “E03-FAIL TO COMM” display. Repeat the test
to attempt to correct a communication failure, as any successful communication
will clear this display.
Delay Arming 1-4 hours. (Not for UL-listed systems.) Your system may be set to arm
automatically after a delay period of 1 to 4 hours.
To Delay Arm the system:
• With the function “TO ARM IN 1-4 HRS“ displayed in the window, e nter the desired
Delay Arming time in hours (
1, 2, 3 ,or 4
), followed by J.
• At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing
C , but it will
turn back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.
A C T I V A T E
D I A L E R T E S T Y / N
T O A R M I N 1 - 4 H R S
P R E S S 1 - 4 / N
GEM-X255_OI273_USER.pub
page 18 Tuesday, September 10, 2002 13:14