Nokia 3155 - Manual (Page 63)

S e t t i n g s
55 Copyright © 2005 Nokia. All rights reserved.
Loopset
The LPS-4 loopset is recommended for
use with your device. Select the option
of your choice to enter the submenu
and modify its settings.
Default profile —Choose the profile you
want to be automatically activated
when your device is connected to a
loopset.
Automatic answer —Answer calls
automatically after one ring when a
loopset is connected. Select
On or Off .
Note: Automatic answer will
only be active whilst
General
profile is active.
Charger
Select the option of your choice to
enter the submenu and modify its
settings.
Default profile —Choose the profile you
want automatically activated with
your device connected to the charger.
Lights —Choose to keep the device
lights always on, or to shut off
automatically after several seconds.
Select
On or Automatic .
■ Security settings
When first accessing the security
settings, enter the preset lock code.
The default setting for lock code is
12345. Depending on your wireless
service provider or network operator,
the preset lock code can be a four digit
number such as 1234 or 0000. If none
of these work, contact your wireless
service provider or network operator
for help.
Phone lock
The phone lock feature protects your
device from unauthorised outgoing
calls or unauthorised access to
information stored in the device.
With phone lock activated,
Phone
locked appears each time you turn your
device on or off.
With the device locked, calls may still
be possible to the official emergency
number programmed into your device.
1. In standby mode, select Menu >
Settings > Security .
2. Enter the lock code, and select OK .
See " Change lock code ," p. 56 .
3. Select Phone lock and one of the
following options:
Off —Immediately turns off the
device lock feature.
Lock now —Immediately turns on
the device lock feature.