Nokia 3155 - Manual (Page 13)

P h o n e a t a g l a n c e
5 Copyright © 2005 Nokia. All rights reserved.
Your device, by default, requires you to
enter the lock code to restore factory
settings:
1. In standby mode, select Menu >
Settings > Restore factory sett. .
2. Enter the security code, and select
OK . See " Change lock code ," p. 56 .
Note: Depending on your
wireless service provider or
network operator, your device
may sometimes ask you for the
security code (defaulted to
12345) instead of the lock
code.
■ Go to functions
The Go to menu enables you to change
the function of the left selection key
on your phone. With this function,
you can quickly access your most
frequently used functions from the
Go
to menu in standby mode.
Choose Go to functions
1. In standby mode, select Go to >
Options > Select options .
2. Scroll up or down to highlight the
desired function.
3. Select Mark to add a function or
Unmark to remove a function.
4. Select Done when you have added
all desired functions.
5. Select Yes to save the changes.
6. In standby mode, select Go to to
display a list of the functions you
selected in step 2.
Organise functions
1. In standby mode, select Go to >
Options > Organise .
2. Scroll up or down to highlight the
function you want to rearrange,
and select Move > Move up , Move
down , Move to top , or Move to
bottom .
3. Select Done > Yes to save the
changes.