Nokia 3155 - Manual (Page 36)

M e s s a g e s
28 Copyright © 2005 Nokia. All rights reserved.
Please check with your wireless service
provider or network operator for
specific instructions on using your
voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Keep in mind that each voice mail
service may vary. However, it may
look similar to the following:
Dial 8585551212, pause 5 seconds,
press 1, pause 2 seconds, press
1234, and press #.
Phone numbers with dialling
codes
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. To set up dialling
codes, do the following:
1. In standby mode, select Menu >
Contacts > Speed dials .
2. Scroll to an (empty) Speed dials
slot, and select Assign .
3. Enter your number, including the
area code.
4. Enter any dialling codes as
necessary after the entered
phone number.
For example, if you pause for
5 seconds after connecting to voice
mail, enter p twice (two times
2.5 seconds) after the voice
mailbox number: 2145551212pp.
5. Enter any remaining pauses or
other information that enables you
to listen to your messages, and
select OK .
6. Enter a name (such as voice mail),
and select OK .
To dial and listen to your voice mail,
press and hold the assigned speed dial
key in standby mode.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. When the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
+—Replaced by the international
access code.
w—Waits for you to press the call key
before sending the numbers or codes
that follow.