National Instruments Single-Ended Digital Waveform Generator/Analyzer Modules NI SMB-2163 - Manual (Page 9)

© National Instruments Corporation 9 NI SMB-2163 User Guide
Specifications
Digital I/O
DIO channels.......................................... 32, single-ended
Control I/O channels .............................. 5, single-ended
Typical propagation delay
through NI SMB-2163 ........................... 1.2 ns
Typical channel-to-channel skew
........... ±35 ps
Typical trace
characteristic impedance ........................ 50
Ω
Power
Maximum voltage rating ........................ 5.5 V
Physical
Dimensions............................................. 30.5 cm × 4.5 cm × 26.5 cm
(12.0 in.
× 1.77 in. × 10.43 in.)
I/O connectors ........................................ One 68-pin DDC connector,
37 SMB jack connectors,
one banana-style connector
CE Compliance
Refer to the regulatory statement for this product for additional
compliance information. To obtain this information for this product,
visit
ni.com/hardref.nsf , search by model number or product line,
and click the appropriate link in the Certification column.
Caution When connected to other test objects, this product may cause radio interference.
In a residential environment, the user may be required to take adequate measures to reduce
the radio interference.