National Instruments 9211 - Manual (Page 5)

© National Instruments Corporation 5 USB-9211/9211A User Guide and Specifications
3. Align the I/O module with the carrier, as shown in Figure 3.
Figure 3. Module Installation
4. Squeeze the latches and insert the NI 9211 module into the carrier.
5. Press firmly on the connector side of the NI 9211 module until the
latches lock the module into place, as shown in Figure 4.
Figure 4. Locking Module into Place
6. Connect the USB cable to the assembled USB-9211/9211A.
1 High Voltage Screw Terminal Backshell
1