NorthStar Navigation Multi-Function Unit M84 - Manual (Page 98)

Northstar M121/M84 Installation and Operation Manual 97
20-8 Installation: SmartCraft
If the boat has one or two SmartCraft capable
Mercury petrol/gasoline engines, connect the
Instrument to the SmartCraft engines with
an optional SmartCraft gateway. The display
unit can display engine data and trim and can
control troll speed.
Note:
Fit a single gateway for single engines and a
dual gateway for dual engines.
SmartCraft engines have fuel flow sensors,
therefore Northstar fuel sensors are not
required as well.
If the fuel tank does not have SmartCraft
level sensors, wire for auto power (see
section 20-4).
During setup enter the SmartCraft setup data.
For information on installing, setting up and
using SmartCraft, see the SmartCraft Gateways
Installation and Operation Manual.
SmartCraft Gateway
White
20-9 Installation: Radar
Install the Northstar radar as described in the
Installation Manual supplied with the radar.
Carefully read the important safety and warning
information and also the location and wiring
guidelines BEFORE installing the radar.
Set up the radar as described in section 19-4.
Radar cable
RADAR